China supplier Water Ring Vacuum Pump (2BEA) with high quality

Product Description

2BEA series water ring vacuum pumps and compressors is a kind of high-efficiency and enger-saving product developed on the basis of years of production experience and scientific research, combined with international advanced technology, typically used for pumping gas without solid particles, insoluble in water, and non-corrosive, so as to form a vacuum or pressure in a sealed container.

By changing the materials, it can be used for pumping corrosive gases or corrosive liquids. It is widely used in papermaking, chemical, petrochemical, light industry, pharmaceuticals, food, coal, mineral processing, and other industries.

Features
1. Use imported bearings to ensure accurate location and stable operation of the impeller.
2. Impeller material use cast iron or welded steel, and fully guarantee the impeller stability in a variety of adverse conditions, and greatly increased the pump life.
3. Pump body uses steel, increase the service life of vacuum pump.
4. As the most easily damaged parts, the shaft sleeve uses high-chromium stainless steel, life expectancy has increased by 5 times.
5. Pulley (belt drive) is standard high-precision, reliable operation and long service life and convenient disassemble.
6. Coupling (direct Transmission) uses standard high-strength flexible coupling, flexible component uses polyurethane material, which is stable and reliable operation, long service life.
7. ‘Unique top-mounted gas-water separator to save space and reduce the noise.
8. All casting uses resin sand casting, which is good surface quality, pump cooling well.
9. Mechanical seal (optional) is imported, fully guaranteed no leakage in the long-running process.
10. Casing inner wall is similar to the type of oval, ensure the best exhaust results.

Specifications

Model Limited Vacuum hpa Speed r/min Max. Capacity m³ /min Power KW Driven Type Voltage Suction mm Discharge mm
2BEA-103-0 33 1300 4.9 11 Pulley 380 V 65 65
1450 5.6 11 Couping
1625 6.2 15 Pulley
1750 6.7 15 Pulley
2BEA-153-0 33 1100 7.4 15 Pulley 380 V 100 100
1300 8.9 18.5 Pulley
1450 10 18.5 Couping
1625 10.8 22 Pulley
1750 11.5 30 Pulley
2BEA-202-0 33 790 9.5 18.5 Pulley 380 V 125 125
880 11 18.5 Pulley
980 12 22 Coupling
1100 14 30 Pulley
1170 15 30 Pulley
2BEA-203-0 33 790 14 30 Pulley 380 V 125 125
880 16 30 Pulley
980 18 37 Coupling
1100 20 45 Pulley
1170 21 45 Pulley
2BEA-252-0 33 565 20 30 Pulley 380 V 150 150
590 22 30 Coupling
660 25 37 Pulley
740 28 45 Coupling
820 30 55 Pulley
880 33 75 Pulley
2BEA-253-0 33 565 28 45 Pulley 380V 150 150
590 30 45 Coupling
660 35 55 Pulley
740 39 75 Coupling
820 43 90 Pulley
880 47 90 Pulley
2BEA-303-0 33 472 43 55 Pulley 380V 200 200
520 45 75 Pulley
530 48 75 Pulley
590 52 75 Coupling
660 58 90 Pulley
740 67 110 Coupling
2BEA-353-0 33 390 55 75 Pulley 380V 250 250
415 58 90 Pulley
464 65 110 Pulley
520 72 132 Pulley
590 81 160 Coupling
2BEA-403-0 33 330 78 132 Pulley 380V 300 300
372 85 160 Pulley
420 97 185 Pulley
472 110 200 Pulley
530 122 250 Pulley

 
 

 
 

Model Limited Pressure hpa Speed r/min Max. Capacity m³ /min Power KW Driven Type Voltage Suction mm Discharge mm
2BEA-355-1 160 372 61 90 Pulley 380V 250 250
420 71 110 Pulley 380 V
472 79 110 Pulley 380 V
500 83 132 Pulley 380 V
530 88 132 Pulley 380 V
590 95 160 Coupling 380 V
2BEA-405-1 160 330 93 132 Pulley or Reducer 380 V 300 300
372 106 160 380 V
420 119 185 380 V
472 130 220 380 V
530 141 280 380 V
2BEA-505-1 160 266 121 160 Pulley or Reducer 380 V 350 350
298 139 185 380 V
330 153 220 380 V
372 169 250 6KV
420 186 315 6KV
2BEA-605-1 160 220 168 220 Reducer 6KV 400 400
236 181 250 6KV
246 188 280 6KV
266 206 280 6KV
276 210 315 6KV
298 228 355 6KV
312 234 355 6KV
2BEA-705-1 160 197 259 355 Reducer 6KV Or 10KV 500 500
220 286 400
246 318 450
266 342 500
276 352 560

How to Assemble a Pulley System

A pulley is a wheel that rotates on a shaft or shaft to support the movement of a taut cable. Pulleys allow power to be transmitted from the shaft to the cable.
pulley

Simple pulley

The simplest theory of operation of a pulley system assumes that the rope and weight are weightless and that the rope and pulley are not stretched. Since the force on the pulley is the same, the force on the pulley shaft must also be zero. Therefore, the force exerted on the pulley shaft is also distributed evenly between the 2 wires passing through the pulley. The force distribution is shown in Figure 1.
The use of simple pulleys is as old as history. Before the Industrial Revolution, people relied on muscle strength to carry heavy loads. Pulleys, levers and ramps make this possible. Today, we can see pulleys in a variety of systems, from exercise equipment to garage doors, and even rock climbers use them to help them reach greater heights. As you can see, these simple machines have been around for centuries and are used in everyday life.
Another simple pulley system is the pulley system. In this system, there is a fixed pulley at the top and a movable pulley at the bottom. The 2 pulleys are connected by a rope. This combination reduces the amount of work required to lift the load. Additionally, the ropes used in this system are usually made of rope and woven through the individual wheels of the pulley drum.
A pulley is an ingenious device that distributes weight evenly and can be used to lift heavy objects. It is easy to build and can be easily modified for a wide range of activities. Even young children can make their own with very few materials. You can also use simple household items such as washing machines, thin textbooks and even chopsticks. It’s very useful and can be a great addition to your child’s science and engineering activities.
The simplest pulley system is movable. The axis of the movable pulley can move freely in space. The load is attached to 1 end of the pulley and the other end to the stationary object. By applying force on the other end of the rope, the load is lifted. The force at the other end of the rope is equal to the force at the free end of the pulley.
Another form of pulley is the compound pulley. Compound pulleys use 2 or more wheels to transmit force. Compound pulleys have 2 or more wheels and can lift heavier objects. Dim is POLE2.
pulley

tapered pulley

It is important to clean and align the bolt holes before assembling the tapered pulley. The screws should be lubricated and the threads cleaned before installation. To install the pulley, insert it into the shaft keyway. The keyway should be aligned with the shaft hole to prevent foreign matter from entering the pulley. Then, alternately tighten the bolts until the pulley is tightened to the desired torque.
A tapered pulley is a basic structure. The pulley belt is arranged across 4 steps. Installed between the headstock casting and the main shaft, it is often used in the paper industry. It integrates with printing machinery and supports assembly lines. These pulleys are also available in metric range options, eliminating the need for ke-waying or re-drilling. They are easy to install, and users can even customize them to suit their needs.
CZPT Private Limited is a company that provides unique products for various industries. This large product is used for many different purposes. Also, it is manufactured for industrial use. The company’s website provides detailed specifications for the product. If you need a tapered pulley, contact a company in your area today to purchase a quality product!
Tapered pulleys are vital to paper mill machinery. Its special design and construction enable it to transmit power from the engine source to the drive components. The advantages of this pulley include low maintenance costs and high mechanical strength. Cone wheel diameters range from 10 inches to 74 inches. These pulleys are commonly used in paper mills as they offer low maintenance, high mechanical strength and low wear.
A tapered sleeve connects the pulley to the shaft and forms an interference fit connector. The taper sleeve is fixed on the shaft with a key, and the corresponding inner hole is fixed on the shaft with a key. These features transmit torque and force to the pulley through friction. This allows the tapered pulley to move in a circular motion. The torque transfer characteristics of this pulley are most effective in high speed applications.
The sleeve is the most important part when assembling the tapered pulley. There is an 8-degree taper inside the cone, which is closely connected to the inner surface of the pulley. Taper sleeves and pulleys are interchangeable. However, tapered pulleys can be damaged after prolonged use.
pulley

pulley pulley system

A pulley pulley system is a great way to move heavy objects. These systems have been around for centuries, dating back to the ancient Greeks. This simple mechanism enables a person to lift heavy objects. These blocks are usually made of rope, and the number of turns varies for different types of rope. Some blocks have more cords than others, which creates friction and interferes with the easy movement of the lifting system.
When using a pulley pulley, the first thing to decide is which direction to pull. Unfavorable rigging means pulling in the opposite direction. In theory, this method is less efficient, but sometimes requires a certain amount of work space. The benefit is that you will increase the mechanical advantage of the pulley by pulling in the opposite direction. So the interception and tackle system will give you more of a mechanical advantage.
Pulley pulleys are an excellent choice for lifting heavy objects. The system is simple to install and users can easily lift objects without extensive training. Figure 3.40 shows a pulley in action. In this photo, the person on the left is pulling a rope and tying the end of the rope to a weight. When the rope is attached to the load, the rope will be pulled over the pulley and pulley.
The blocks on the blocks are attached to the ends of the rope. This creates unique lifting advantages compared to single-line systems. In Figure 3, the tension of each thread is equal to one-third of the unit weight. When the rope is pulled over the pulley, the force is divided equally between the 2 wires. The other pulley reverses the direction of the force, but that doesn’t add any advantage.
Use pulleys to reduce traction and load. The weight of the load has not changed, but the length of the rope has increased. Using this method, lifting the load by pulling the rope 4 times reduces the force required to lift 1 foot. Likewise, if the pulley system had 4 pulleys instead of three, the length of the rope would be tripled.
The system can transmit loads in any direction. Rope length is determined by multiplying the distance from the fixed block to the load by the mechanical advantage. If the mechanical advantage is 3:1, then passing the rope through the pulley 3 times will produce the required traction distance. Also, the length of the rope will depend on the mechanical advantage, so if the load is 3 times the length of the rope, it will be more than 3 times the required length.

China supplier Water Ring Vacuum Pump (2BEA)     with high qualityChina supplier Water Ring Vacuum Pump (2BEA)     with high quality

Recent Posts