China Standard Full Hydraulic 1200m Multifunctional Deep Well Truck Mounted Water Well Drill Rig with Good quality

Product Description

Product Description
 

China manufacture Truck Mounted Water Well Bore Hole Drilling Machine Drilling Rig Deep Truck Type Drill Rig 

1.SPD1000JDF vehicle-mounted water well drilling rig adopts vehicle-mounted self-propelled type, which is a vehicle-mounted turntable rotary drilling rig; the drilling rig adopts Xihu (West Lake) Dis.feng Motor 6×4 special vehicle chassis, diesel engine, main transmission system, gearbox, mechanical double winch unit, mud pump, The turntable, drilling tower, wire rope feeding mechanism, etc. are all installed on the special chassis.
2.The drilling rig is equipped with an independent diesel generator power system for traveling transfer and drilling operation. The vehicle chassis is equipped with a YC6J180-33 water-cooled six-stroke supercharged and intercooled diesel engine. The drilling operation is equipped with a 100KW diesel generator set. This model is dedicated to construction machinery and has With advanced and mature technology, stable performance, simple installation, few failures, and convenient maintenance, it is most suitable for drilling operations in areas with harsh climate conditions such as high temperature, plateau, severe cold, and drought.
3.The main drilling method of the drilling rig is positive circulation drilling of rotary table mud, equipped with BW850/2A horizontal reciprocating double-cylinder double-acting piston mud pump, using mud as flushing fluid, and realizing positive circulation drilling through high-pressure grouting of the mud pump; if equipped with Appropriate drilling tools can also be adapted to other drilling methods, and can be drilled in various formations such as clay, sand, bedrock and so on.
4.According to user requirements, equipped with air compressors produced by American Sullair, Japan PDSJI00S, Sweden Atlas, domestic Kaishan, HongHangZhouan and other manufacturers, it can implement pneumatic DTH hammer drilling; Double-wall special drill pipe, gas-water separator, etc., can implement gas lift reverse circulation drilling.
5.The main drive of the drilling rig is mechanical drive, the rig is lifted and lowered, the 6 outriggers are balanced, and the 4 leveling outriggers are hydraulically controlled.
6.The drilling rig is equipped with a mechanical hoist, a tower pulley block, and an auxiliary pressurizing device linked to the lifting rings on both sides of the faucet. It can assist in pressurized drilling when encountering mudstone, strong weathering, bedrock and other strata structures to improve the hole-forming efficiency.
7.The appearance of the drilling rig is beautiful and atmospheric, the torque of the rotary table is large, and the footage is fast. It is suitable for farmland water conservancy projects, industrial deep water wells, national defense construction, hydrological exploration, geothermal mine water well drilling, and also for other engineering foundation hole construction. It is well received by domestic and foreign customers

Product Parameters

Comprehensive overview
Max-Depth:1000M
Hole diameter:150-500MM
Dimensions;12000mm×2550MM×3500MM
Total Weight:24000KG
Drilling technology can be used: mud positive circulation, DTH-hammer, air lift reverse circulation, Mud DTH-hammer.
CHASSIS
No Name Model
1 Truck chassis SINOTRUK HOWO
6*4
290HP
2  Drilling tower Retractable :Drill tower load:50T
Operation:Two hydraulic support cylinders
Drill tower height:7M
3 Pull up-Pull down cylinder Pull down:15T
Pull up:30T
4 Outrigger cylinder Brace:Four hydraulic leg cylinders
Equipped with hydraulic lock to prevent leg retraction
5 Hoist Single rope pull up:1T
6 Power head Torque:10000NM
Revolutions:0-90 RPM
7 Control box Integrated console
Lifting and boring tower, outrigger cylinder, lifting, lowering, power head , etc.
Instrument: drilling tool weight gauge, system pressure gauge, etc.
8 Mud pump  BW1100/5 Max 1100L/MIN
9        Air compressor PRESSURE:20 BAR
AIR VOLUME:29m³/M
10 Foam pump Flow:42L/MIN
Revolutions:660R/MIN
Improving the up-and-down efficiency of drilling cuttings, cooling and lubricating the impactor

WHY CHOOSE SPEEDMADE INDUSTRIES Co.,Ltd?
1.Our propose is to supply the most suitable borehole drilling machine to users.
You can get a full range of product selection advice and product customization without paying any fees.

2.We have 2 special groups of design teams. One team of after-sales engineers with more than 30 years of construction experience at home and abroad, other team of designers who graduated from well-known universities and have rich work experience. We will combine a wealth of practical construction experience and the most advanced professional theoretical knowledge to meet your various demands.
3.We are not only familiar with borehole drilling rig, but also familiar with the human environment, construction environment and strata in the construction field at home and abroad. Provide you with the greatest technical support, save costs and create the greatest value with you. Yes, choosing us is your best decision.

4. Support overseas train and maintain. We do ten days overseas train for free,after you buy our machine.

5. One year Warranty. Speedmade knows the various needs of the water well service companies and operators worldwide.
Customers who buy rigs from us can benefit from great saving thus boost their bottom line.

FACTORY  SHOW

-PAYMENT-

DIY customization: please provide your rock formation information or detailed size drawings.

Free samples: some samples can be provided free of charge.

Trading:EXW, FOB, CFR, CIF, DDU such as.

Payment:T/T L/C,D/A,D/P,Western Union,MoneyGram.

Delivery time: normally 7-12 days

-CERTIFICATE-

-PACKAGING STYLE-

-DELIVERY-

Delivery: there are 4 main delivery channels including air, sea, express and road transportation, which can be selected according to customers’ different requirements.

Air freight logistics:DHL/UPS/EMS/TNT/ FEDEX,etc.

 

 

Mechanical advantages of pulleys

A pulley is a mechanical device used to transmit motion. The device has a variety of uses, including lifting heavy objects. In this article, we will discuss the mechanical advantages, types, common uses and safety considerations of pulleys. We’ll also discuss how to identify pulleys and their components, and what to look out for when using pulleys. Read on to learn more about pulleys.
pulley

Mechanical advantages of pulleys

The mechanical advantage of pulleys is that they change the direction of force from 1 direction to another. In this way, the person lifting the heavy object can change its position with minimal effort. The pulleys are also easy to install and require no lubrication after installation. They are also relatively cheap. Combinations of pulleys and cables can be used to change the direction of the load.
The mechanical advantage of a pulley system increases with the number of ropes used in the system. The more cycles a system has, the more efficient it is. If the system had only 1 rope, the force required to pull the weight would be equal. By adding a second rope, the effort required to pull the weight is reduced. This increase in efficiency is known as the mechanical advantage of the pulley.
Pulleys have many uses. For example, ziplines are 1 application. This is a good example of pulleys in use today. Pulley systems can be complex and require a lot of space. Using ziplines as an example, advanced students can calculate the mechanical advantage of multiple pulleys by dividing the work done by each pulley by the remainder or fraction. Regents at the University of Colorado created a zipline with K-12 input.
Another use for pulleys is weight lifting. This technique is very effective when using multiple strands of rope. A single rope going from 1 pulley to the other with just 2 hands is not enough to lift heavy objects. Using a pulley system will greatly increase the force you receive. This power is multiplied over a larger area. So your lifting force will be much greater than the force exerted by a single rope.
The pulley is a great invention with many uses. For example, when lifting heavy objects, pulleys are a great way to get the job done, and it’s easier to do than 1 person. The pulley is fixed on a hinge and rotates on a shaft or shaft. Then pull the rope down to lift the object. A pulley assembly will make the task easier. In addition, it will also allow power to be transferred from 1 rotary shaft to another.
pulley

Types of pulleys

If you are an engineer, you must have come across different types of pulleys. Some pulleys come in multiple types, but a typical pulley has only 1 type. These types of pulleys are used in various industrial processes. Here are some common types of pulleys that engineers encounter on the job. In addition to the above, there are many more. If you haven’t seen them in practice, you can check out a list of the different types below.
Fixed pulleys: Fixed pulleys have a roller attached to a fixed point. The force required to pull the load through the fixed pulley is the same as the force required to lift the object. Movable pulleys allow you to change the direction of the force, for example, by moving it laterally. Likewise, movable pulleys can be used to move heavy objects up and down. Commonly used in multi-purpose elevators, cranes and weight lifters.
Composite pulleys combine fixed and movable pulleys. This combination adds to the mechanical advantage of both systems. It can also change the direction of the force, making it easier to handle large loads. This article discusses the different types of pulleys used for lifting and moving. Braided pulleys are an example of these pulleys. They combine the advantages of both types.
A simple pulley consists of 1 or more wheels, which allow it to reverse the direction of the force used to lift the load. On the other hand, dual-wheel pulleys can help lift twice the weight. By combining multiple materials into 1 pulley, a higher ME will be required. Regardless of the type of pulley, understanding the principles behind it is critical.
Pulleys are an important part of construction and mechanical engineering, and their use dates back to Archimedes. They are a common feature of oil derricks and escalators. The main use of pulleys is to move heavy objects such as boats. In addition to this, they are used in other applications such as extending ladders and lifting heavy objects. The pulley also controls the aircraft rudder, which is important in many different applications.

Commonly used

Common uses for pulleys are varied. Pulley systems are found throughout most areas of the house, from adjustable clotheslines to motor pulleys in different machines. Commercially, 1 of the most common uses is for cranes. Cranes are equipped with pulleys to lift heavy objects. It is also common to use pulley systems in tall buildings, which allow tall buildings to move with relative ease.
Pulleys are commonly used in interception and zipline systems, where a continuous rope around the pulley transmits force. Depending on the application, the rope is either light or strong. Pulleys are formed by wrapping a rope around a set of wheels. The rope pulls the object in the direction of the applied force. Some elevators use this system. Pull a cable on 1 end and attach a counterweight on the other end.
Another common use for pulleys is to move heavy objects. Pulleys mounted on walls, ceilings or other objects can lift heavy objects like heavy toolboxes or 2×4 planks. The device can also be used to transfer power from 1 rotating shaft to another. When used to lift heavy objects, pulleys can be used to help you achieve your goals of a good workout.
Pulley systems have a variety of uses, from the most basic to the most advanced. Its popularity is indisputable and it is used in different industries. A good example is timing belts. These pulleys transmit power to other components in the same direction. They can also be static or dynamic depending on the needs of the machine. In most cases, the pulley system is custom made for the job.
Pulley systems can be simple or complex, but all 3 systems transfer energy efficiently. In most cases, the mechanical advantage of a single pulley is 1 and the mechanical advantage of a single active pulley is 2. On the other hand, a single live pulley only doubles the force. This means you can trade effort for distance. Pulleys are the perfect solution for many common applications.
pulley

Safety Notice

If you use pulleys, you need to take some safety precautions. First, make sure you’re wearing the correct protective gear. A hard hat is a must to avoid being hit by falling objects. You may also want to wear gloves for added protection. You should also maintain a good distance from the pulley so that nearby people can walk around it safely.
Another important safety measure to take before using a chain hoist is to barricade the area to be lifted. Use marker lines to prevent the load from sliding when moving horizontally. Finally, use only the sprocket set for vertical lift. Always install shackle pins before lifting. You should also wear personal protective equipment such as earplugs and safety glasses when using the chain hoist.
In addition to these safety measures, you should also use cables made from aerospace-grade nylon. They will last many cycles and are made of high quality materials. Also, make sure the cables are lubricated. These measures reduce friction and corrosion. No matter what industry you are in, be sure to follow these precautions to ensure a long service life for your cables. Consult the cable manufacturer if you are unsure of the appropriate material. A company with 60 years of experience in the cable industry can recommend the right material for your system.

China Standard Full Hydraulic 1200m Multifunctional Deep Well Truck Mounted Water Well Drill Rig     with Good qualityChina Standard Full Hydraulic 1200m Multifunctional Deep Well Truck Mounted Water Well Drill Rig     with Good quality

Recent Posts