Product Description
CENTRIFUGAL CONDENSER FAN packaged conditioner
Cooling Capacity 68 ~ 435MBH / 5 ~ 36Ton / 7 ~ 50HP
PACKAGE CENTRAL AIR CONDITIONER FOR DUCTED CONDENSER AIR DISCHARGE FEATURES
1.GENERAL DESCRIPTION
The compact, rugged and reliable ACPS-CP, centrifugal fan type air cooled packaged unit, is designed to meet the owners, consultants and contractors requirement of efficient, quiet and dependable performance. The wide range of cooling capacity satisfy most requirement for offices, industrial buildings, supermarkets, shops ,etc. These units are factory assembled, leak tested, evacuated, dehydrated, precharged with correct amount of refrigerant, tested run in factory and ready for installation.
2.SCROLL COMPRESSOR(S)
The scroll compressor(s) is a new concept of innovative design. This scroll compressor with a high EER, low sound power level, best sound quality and high reliability meets the application requirement and user expectation globally. The
high efficiency is realised by a controlled orbit with floating seals and advanced scroll geometry. The reliability is realised by the no-contact scroll design and 100% motor cooled by suction gas. A check valve is located directly above the fixed
scroll discharge port. This prevents the compressor from running backwards after the power has been switched off (i.e. no rattling and no shut-down noise). The motor is fitted with a thermostat which protects the compressor if malfunction occurs.
3.EVAPORATOR, CONDENSER BLOWER AND MOTOR
Centrifugal blower(s) is mounted on a rigid shaft in heavy duty pillow block self-aligning ball bearings. Complete blower(s) and drive assembly are resiliently isolated from unit casing. Evaporator blower motor and V-belt pulley drive
assembly can be factory fitted to handle the desired cfm and static pressure for all models.
4.REFRIGERANT CIRCUIT(S)
Each independent refrigerant circuit is constructed of copper pipings with brazed connections; joining compressor, condenser coil, filter drier, sight glass, thermo-expansion valve, distributor and evaporator cooling coil in a completely sealed loop. The refrigerant circuit is factory leak tested, dehydrated, evacuated and charged with refrigerant.
5.SAFETY CONTROLS
High pressure and low pressure cut-outs to guard against compressor damage due to high discharge head pressure and system leakage respectively. Good looking LED display,timer ,fan speed,temperature,Error code,mode.
6.CASING
All steel parts are coated with epoxy-acrylic Electro-Deposition (ED) paint which gives excellent finishing, weatherability and corrossion resistance. Before ED coating, the part undergoes a complete pretreatment process which involves degreasing, phosphating and rinsing with demonized water. It increases the paint adhesion effect and rust preventing effect to obtain high quality paint film. ED painting is the best painting system which can even coat the inaccessible places like the edges, joints or interior surface of hollow sections. The evaporator section is insulated with 1/2″ [13mm] thick x 1 1/2 lb per cu. ft [24 kg per cu meter]. mat faced linacoustic fiberglass, tightly fitted with gasket on rigid frame, to guard against leaks of conditioned air.
7.FILTERS
1″ [25mm] thick washable panel filters.
8.OPTIONAL AND ACCESSORIES
1.) For installation near the sea or in chemically corrosive atmosphere, unit can be provided with either copper fin coils, tinned copper fin coils
2.) Hot Water Heating Coils – Coils are constructed of 1/2″ [13mm] OD seamless copper tubes mechanically expanded into die-formed corrugated aluminum fins. Factory fit between blower and coil sections.
3.) Electric Reheaters – Consists of finned tubes electric heaters, mounted down-stream of cooling coils and factory wired with necessary controls.
4.) Hot gas by pass can be provided for application where the suction pressure gets very low and there is a possibility that the coil might freeze.
5.) Variable frequency drive for condenser fan for low ambient application. Controlled by the head pressure valve.
6.) Double-Skinned Casing – All models can be provided with double-skinned casing, with sandwiched fibreglass insulation and internal GI liner (perforated or non-perforated) for improved sound attenuation.
6.)Stainless steel structure optional basing on customized requirement.
CENTRIFUGAL CONDENSER FAN PACKAGE AIR CONDITIONER PICTURES
TECHNICAL DATA
SOME PROJECT LIST
| PROJECT TIME | EQUIPMENTS QUANTITY | PROJECT LOCATION |
| 2016 | 20 UNITS OF 47kw | NIGERIA PROJECT REPLACE CARRIER OLD MODEL |
| 2571 | 18 UNITS OF 47KW | SOUTH AFRICA PROJECT BY CLIENT BRAND |
| 2571 | 47 UNITS OF 93KW | SOUTH AFRICA PROJECT BY CLIENT BRAND |
Calculate the ideal mechanical advantage of pulleys
The basic equations for pulleys can be found in this article. It will also cover the different types of pulleys, the ideal mechanical advantages of pulleys, and some common uses of pulley systems. Read on to learn more! After all, a pulley is a simple mechanical device that changes the direction of a force. Learn more about pulleys and their common uses in engineering.
pulley basic equation
Pulleys work the same way as gravity, so they should withstand similar forces. Newton’s laws of motion can be used to calculate the forces in a pulley system. The second law of motion applies to forces and accelerations. Similar to this is Newton’s third law, which states that the directions of forces are equal and opposite. The fourth law dictates the direction of force. The Fifth Law states that tension is in equilibrium with gravity.
A pulley is a simple mechanism that transmits force by changing direction. They are generally considered to have negligible mass and friction, but this is only an approximation. Pulleys have different uses, from sailboats to farms and large construction cranes. In fact, they are the most versatile mechanisms in any system. Some of their most common applications and equations are listed below.
For example, consider 2 masses m. Those of mass m will be connected by pulleys. The static friction coefficient of the left stop is ms1, and the static friction coefficient of the right stop is ms2. A no-slip equation will contain multiple inequalities. If the 2 blocks are considered to be connected by a pulley, the coefficient of kinetic friction is mk. In other words, the weight of each block carries the same mass, but in the opposite direction.
Types of pulleys
A pulley is a device used to pull and push objects. Pulley systems are ropes, cables, belts or chains. The “drive pulley” is attached to the shaft and moves the driven pulley. They are available in a variety of sizes, and the larger they are, the higher the speed of power transmission. Alternatively, use small pulleys for smaller applications.
Two-wheel pulleys have 2 mechanical advantages. The greater the mechanical advantage, the less force is required to move the object. More wheels lift more weight, but smaller pulleys require less force. In a two-wheel pulley system, the rope is wound around 2 axles and a fixed surface. As you pull on the rope, the shafts above slowly come together.
Compound pulleys have 2 or more rope segments that are pulled up on the load. The mechanical advantage of compound pulleys depends on the number of rope segments and how they are arranged. This type of pulley can increase the force by changing the direction of the rope segment. There are 2 main types of pulleys. Composite pulleys are most commonly used in construction. The ideal mechanical advantage of pulleys is 2 or more.
Construction pulleys are a basic type. They are usually attached to wheel rails and can be lifted to great heights. Combinations of axes are also common. Construction pulleys can be raised to great heights to access materials or equipment. When used in construction, these pulleys are usually made of heavy materials such as wood or metal. They are secured with ropes or chains.
The ideal mechanical advantage of pulleys
The pulley system is a highly complex system with high mechanical advantages. Use a single pulley system to reduce the force required to lift an object by cutting it in half. The mechanical advantage increases as you add more pulleys, such as 6 or seven. To calculate the mechanical advantage of a pulley system, you need to count the number of rope segments between the pulleys. If the free end of the rope is facing down, don’t count it. If it’s facing up, count. Once you have your number, add it up.
The required mechanical advantage of a pulley is the number of rope segments it has to pull the load. The more rope segments, the lower the force. Therefore, the more rope segments the pulley has, the lower the force. If the rope segments are four, then the ideal mechanical advantage is four. In this case, the composite pulley quadrupled the load force.
The ideal mechanical advantage of a pulley system is the sum of the mechanical force and the force required to lift the load at its output. Typically, a single pulley system uses 2 ropes, and the mechanical force required to lift the load is multiplied by the 2 ropes. For a multi-pulley system, the number of ropes will vary, but the total energy requirement will remain the same. The friction between the rope and pulley increases the force and energy required to lift the load, so the mechanical advantage diminishes over time.
Common uses of pulley systems
A pulley system is a simple mechanical device typically used to lift heavy objects. It consists of a rotating wheel attached to a fixed shaft and a rope attached to it. When the wheel moves, the force applied by the operator is multiplied by the speed of the pulley, and the force is multiplied by the weight of the object being lifted. Common uses for pulley systems include pulling, lifting, and moving heavy objects.
The oil and petroleum industries use pulley systems in a variety of applications. Most commonly, pulleys are used in drilling operations and they are installed on top of the rig to guide the cable. The cable itself is attached to 2 pulleys suspended in the derrick, where they provide mechanical energy to the cable. Using a pulley system in this application provides the force needed to move the cable safely and smoothly.
The main advantage of the pulley system is that it minimizes the force required to lift an object. The force used to lift the object is multiplied by the desired mechanical advantage. The more rope segments, the lower the force required. On the other hand, a compound pulley system can have many segments. Therefore, a compound pulley system can increase the force a worker can exert on an object.
Safety Precautions to Take When Working on Pulley Systems
There are many safety precautions that should be observed when working on a pulley system. The first is to wear proper protective gear. This includes hard hats that protect you from falling objects. Also, gloves may be required. You should limit the amount of movement in the penalty area, and you should also keep the area free of unnecessary people and objects. Also, remember to wear a hard hat when working on the pulley system.
Another important safety precaution when working on a pulley system is to check the Safe Working Load (SWL) of the pulley before attaching anything. This will help you understand the maximum weight the pulley can hold. Also, consider the angle and height of the pulley system. Always use safety anchors and always remember to wear a hat when working on a pulley system.
Safe use of chain hoists requires training and experience. It is important to read the manufacturer’s manual and follow all safety precautions. If you’re not sure, you can actually inspect the hoist and look for signs of damage or tampering. Look for certifications for sprocket sets and other lifting accessories. Look for the Safe Working Load (SWL) marking on the chain hoist.
Example of a pulley system
Pulley systems are often used to lift items. It allows you to reduce the effort to lift and move the load by applying force in 1 direction. Pulley systems can be built and modeled to fit any type of project. This resource focuses on pulley systems and is designed to support the new GCSEs in Engineering, Design and Technology. There are also many examples of pulley systems suitable for various applications.
In the study, participants who read easy text took longer to manipulate the pulley system than those who read challenging text. In general, this suggests that participants with prior scientific experience used their cognitive abilities more effectively. Additionally, students who read simple texts spent less time planning the pulley system and more time on other tasks. However, the study did show that the time required to plan the pulley system was similar between the 2 groups.
In everyday life, pulley systems are used to lift various objects. Flagpoles are 1 of many pulley systems used to raise and lower flagpoles. They can also be used to raise and lower garage doors. Likewise, rock climbers use pulleys to help them ascend and descend. The pulley system can also be used to extend the ladder.
