Product Description
Product Parameters
|
Parameter |
FYC350 |
|
Overall weight (T) |
22 |
|
Applicable hole diameter (mm) |
140-325 |
|
Drilling depth ( m ) |
350 |
|
One-time push length ( m ) |
6 |
|
Rated air volume of air compressor ( m³/min ) |
31 |
|
Air compressor rated discharge pressure (bar) |
25 |
|
Walking speed ( km/h ) |
80 |
|
Applicable drill pipe diameter ( mm ) |
89 102 |
|
Drill pipe length ( m ) |
3 |
|
Lifting force ( T ) |
20 |
|
Rotation speed (rpm) |
45-120 |
|
Swing torque ( Nm ) |
6200-8500 |
|
Working air pressure (Mpa) |
2.5 |
|
Air consumption (m³/min) |
31 |
|
vehicle |
Xihu (West Lake) Dis.feng Motor |
|
Car engine power ( KW ) |
191 |
|
Air compressor engine power (KW) |
309 |
|
drive form |
6×4 |
|
Tire specifications |
10R20 |
|
steering wheel |
left |
|
Dimensions ( mm ) |
10000×25000×45000 |
1. The vehicle-mounted water well drilling rig adopts the vehicle-mounted self-propelled type, which is a vehicle-mounted turntable rotary drilling rig; the drilling rig adopts a special vehicle chassis, diesel engine, main transmission system, gearbox, mechanical double winch unit, mud pump, turntable, drilling tower, The wire rope feeding mechanism is installed on the special chassis.
2. Two sets of independent diesel engine power systems are respectively configured for the traveling transfer and drilling operation of the drilling rig. The vehicle chassis is equipped with a water-cooled six-stroke supercharged and intercooled diesel engine, and the drilling operation is equipped with a water-cooled four-stroke supercharged and intercooled diesel engine. This model is a construction machinery. Special purpose, it has the characteristics of advanced and mature technology, stable performance, simple installation, few failures, convenient maintenance, etc. It is most suitable for drilling operations in areas with harsh climate conditions such as high temperature, plateau, severe cold, and drought.
3. The main drilling method of the drilling rig is the positive circulation drilling of the rotary mud It can also be adapted to other drilling methods, and can be drilled in various formations such as clay, sand and bedrock.
4. According to user requirements, it can be equipped with air compressor, which can implement pneumatic down-the-hole hammer drilling; if equipped with gas-water dual-water tap, double-wall special drill pipe, gas-water separator, etc., gas-lift reverse circulation drilling can be implemented.
5. The main transmission of the drilling rig is mechanical transmission, the drilling tower is lifted and lowered, the 6 outriggers are balanced, and the 4 leveling outriggers are hydraulically controlled.
6. The drilling rig is equipped with a mechanical hoist, a tower pulley block, and an auxiliary pressurizing device linked to the lifting rings on both sides of the faucet. It can assist the pressurized drilling when encountering mudstone, strong weathering, bedrock and other strata structures to improve the hole-forming efficiency.
7. The appearance of the drilling rig is beautiful and atmospheric, the torque of the rotary table is large, and the footage is fast. It is suitable for farmland water conservancy projects, industrial deep water wells, national defense construction, hydrological exploration, geothermal mine and water well drilling, and can also be used for other engineering foundation holes. welcome.
Detailed Photos
FAQ
Q: Are you a manufacturer or trading company?
A: We are a specialized manufacturer.
Q: What are your main products, and used for?
A: Our products include core barrel, casing, drill rod, drill rig and other drilling parts.They are used for mineral exploration, geological drilling,
Q: How about the delivery terms?
A: 1.Payment: T/T, L/C, Western Union, Paypal, 30% deposit in advance and rest before delivery
2. Min. order quantity: 1 piece.
3. Transportation: By sea, train.
Q: How about discount?
A: Price is based on products and order quantity.
Q: Do you accept sample order?
A: Yes sure, please contact us for details.
Q: How about your after-sales service?
A: As a manufacturer has 32 years of history we offer prompt technology support for all problems and questions. Besides, we accept goods return or replace for quality problem.
Q: Where is your factory located in?
A: Our factory is located in HangZhou city, ZheJiang province, China.
Q: How does your company control the quality?
A: Quality first. In order to guarantee high quality for our products, our always make a serious inspection for all products and raw materials in strict procedure.
What makes pulleys so important?
A pulley is a simple tool that makes it easy to lift or move heavy objects. There are many uses for this tool, but let’s take a look at their mechanical advantages. There are several types and many applications, along with their benefits and costs. So what makes them so important? Read on to find out! Below are some of the most common uses for pulleys. Let’s dive into them.
Mechanical advantage
If you’ve ever used rope and pulley systems, you’ve probably noticed their usefulness. A 3:1 mechanical advantage system is like a 300-pound load being moved 1 foot up by 3 feet of rope. Then you can imagine using the same rope to get into a small space. The same principle applies to limited spaces, and a simple mechanical advantage system is just what you need for this purpose.
Assuming frictionless bearings, a single movable pulley can have 2 mechanical advantages. It is attached to a heavy object and requires the pulling force exerted by the jack to lift the heavy object. However, when you use a compound pulley, the force exerted on the rope to lift the object changes direction. The 3 factors used to measure machine efficiency are force, distance, and relative motion.
The mechanical advantage of the pulley is that it reduces the effort required to lift weights. When the rope is attached to the 2 wheels, applying a force of 500 Newtons can lift a mass of 100 kg. This mechanical advantage is why 2 rings in a pulley are better than one. Therefore, using a pulley system will save you energy. You can also use branches instead of ropes and pulleys.
type
There are several different types of pulleys. They can be simple or complex, depending on how they are connected. Simple pulleys have a grooved wheel on 1 end and are attached to an axle. These pulleys are used to lift heavy objects. They are often found on sailboats, and you can even see them on construction sites. On the other hand, stationary pulleys are attached to stationary structures, such as flagpoles. Fixed pulleys can also be used to lift loads from trucks or trains. Pulleys are also commonly used in wells.
Fixed pulley systems use rollers or single wheels. These pulleys are usually made of nylon or wire rope. They are used in heavy duty applications. They are also used in electric motors. A “V” pulley requires a “V” belt to transmit power. Some of these pulleys have multiple “V” grooves to reduce the risk of power slipping. Once installed, fixed pulleys are suitable for many applications.
Simple pulleys are simple pulleys. It has a pulley mounted on an axle and a rope at 1 end. Rope can be used to pull objects, while plastic pulleys can carry lighter loads. There are 2 main types: heavy duty and simple pulley systems. In either case, their function is the same: they change the direction in which the seat belt is fastened. So when comparing the two, it’s easy to decide which 1 is best for you.
application
Pulley systems are simple machines used for a variety of industrial and mechanical tasks. Its design parameters and benefits have improved over the years, but they remain essential for many applications. Let’s take a look at some of the most common applications of pulleys. The applications for pulley systems are endless, from construction to mining, from transportation to packaging. Read on to learn more!
Pulley systems are often used to lift large objects, such as blocks, that might otherwise be too heavy to lift. It also makes the exploration process easier by helping people pull heavy objects into place. It is also widely used on sailing ships. Due to its low cost of use and no need for lubrication, it is a practical choice for many applications. It can be used to lift heavy objects and support long ropes.
The pulley system allows you to change the force required to move the object. For example, a two-wheel pulley system is especially useful for reducing the effort required to lift large objects. The mechanical advantage increases with the number of wheels in the system. In addition, the mechanical advantage of a two-wheel pulley system depends on the ratio of the load weight to the number of rope segments in the system.
cost
In most cases, an idler replacement will cost around $150, but the exact cost will depend on several factors, including the make and model of the car. The cost also depends on the type of idler you need and the cost of the OEM parts. Some pulleys are easy to replace at home, while others require specialized tools, such as pulley wrenches. The chart below shows the cost of popular vehicles. Prices are valid at the time of writing.
The diameter of the pulley is also important, this should be about 60% of the diameter of the active pulley. You can also purchase compensating pulleys at factory prices. Be sure to select the correct size before placing the pulley on the machine. Also, make sure you have enough space for the pulleys. Once you have the desired pulley size, you can determine the best type of belt to install.
While this method is the most common type of belt drive, there are other methods of spinning cup blanks directly from a flat metal disk. One such method is described in US Patent No. 5,500,31. US Patent No. 1,728,002 and shows a method of making a dynamically balanced V-groove pulley. Using a headstock die with sliders increases the cost of the pulley. In addition, different cup blanks require different molds.
lubricating
The lubrication of pulley bearings is relatively simple. The pulley itself rotates smoothly with little vibration. Bearing contact loads are relatively low, and well-lubricated pulleys operate near ambient temperatures. Here are some tips for properly lubricating pulley bearings. Make sure to lubricate the nozzle before applying grease.
Check grease, elastic ring, pulley bearing clearance once a year. If the elastic ring of the pulley is damaged or the roller bearing on the associated pulley is damaged, replace the pulley. Also, check the running noise of the pulleys to see if they are making noise. Check the bearing, damage to the elastic ring may indicate bearing failure or roller failure.
Proper lubrication is critical to the life of the rotating pinion. Avoid exposure to sunlight or water. Protects the pinion meshing area from hard impurities. Liaise with crane operators and lubricators during maintenance and lubrication operations. They should know how to avoid pitfalls in the lubrication process. In case of malfunction, please contact service personnel and take necessary measures.
Compound Pulley System
A compound pulley system is used to lift heavy objects. These systems can use ropes or cords of different sizes. In general, the total weight of all ropes must be less than the weight of a single rope. The system can be used in large areas, but may not be suitable for smaller spaces. To learn more about compound pulleys, read on! Here are some helpful tips. 1. Understand the difference between single wheel and compound wheel
A composite pulley system consists of 3 components: a drive pulley, 1 or more driven pulleys, and 2 pulleys. The drive wheels are usually connected to shafts that are connected to the engine or transmission. The driven wheel is a separate unit mounted on the same shaft as the drive wheel. A compound pulley system helps lift heavy loads. These pulleys are the most common type of pulley system in use today.
Composite pulley systems are widely used on construction sites. They save energy by spreading the weight of heavy loads over multiple smaller loads. This means that the elevator does not have to use high-capacity lifting equipment. Additionally, the compound pulley system allows users to easily adjust power distribution to meet their individual needs. They can also use more than 2 ropes if necessary. This increases the range of motion of the lift arm.
