Product Description
36″,51″,54″56″Fiberglass fan
Product Description:
51″,54″Cast aluminum/Nylon blade Belt drive Fiberglass Fan
1.Integral molded fiberglass reinforced shell, the inner surface and the outer surface are both smooth
and flat,streamlined appearance design,low wind resistance,high energy efficiency,corrosion resistance easy to clean up without breeding bacteria;
2.Split type fiberglass reinforced blades, light weight, fan running more stable,small vibration, low noise
high energy efficiency, no rust in use life.
3.Special large pulley design with vary advantages of simple structure and maintenan ce-free bearing
4.Spring-loaded tensioner ensures belt tension and improves operating efficiency
5.Cast iron pulley with high strength, wear resistance, and long life.
6.Imported V-belt(Conti/Mitsuboshi),small deformation,long life
7.Alternative motors,such as Siemens,Speecon and so on.
8.Two kinds of optional cone fan: PE rotational molding and hand lamination fiberglass.
Fiberglass Fan Technical parameters
| name | Motor Rated Power | Static Pressure | Pa | 0 | 12 | 25 | 37 | 50 | Installation Open (mm) |
| in.H2O | 0 | 0.05 | 0.1 | 0.15 | 0.2 | ||||
| 51″Fiberglass Cone Fan(Nylon blade Belt drive ) | 1.1KW | Capacity | m³/h | 46700 | 43800 | 41100 | 37400 | 31600 | H*W:1450*1450 |
| cfm | 27500 | 25800 | 24200 | 22000 | 18600 | ||||
| Energy Efficiency Ratio | m³/h/W | 33.4 | 30.3 | 27.7 | 24.6 | 20.5 | |||
| cfm/W | 19.7 | 17.8 | 16.3 | 14.5 | 12 | ||||
| 54″Fiberglass Cone Fan(Nylon blade Belt drive ) | 1.5KW | Capacity | m³/h | 57800 | 54300 | 51000 | 46900 | 43000 | H*W:1620*1620 |
| cfm | 34000 | 31900 | 30000 | 27600 | 25300 | ||||
| Energy Efficiency Ratio | m³/h/W | 32.6 | 30.6 | 28.5 | 26.2 | 23.8 | |||
| cfm/W | 19.2 | 18 | 16.8 | 15.4 | 14 |
Partial view of fiberglass cone fan
51/54 inches Nylon blades fan 51/54 inches Nylon blades fan 51/54 inches Nylon blades fan
Production base
Pig house ventilation environmental control system
About us:
HangZhou Farm Lyric Agri-tech Co., Ltd. is located in HangZhou, a port city in ZheJiang Province, China. Our factory is 40 kilometers away from HangZhou port and 30 kilometers away from HangZhou HangZhou International Airport. The company is mainly engaged in the research and development, design, production, installation and service of CZPT and poultry breeding products. Automatic feeding system, automatic drinking water system, ventilation and cooling system, environmental control system for main pigs, cattle, sheep, chickens and geese. In addition, the company also produces steel structure products, mainly used in the engineering design and construction of modern breeding farm.
We have a first-class RESEARCH and development team, first-class process machines and injection workshop, all research and development, injection are completed in our own workshop.
In this case, we can control the quality ourselves and provide custom designs.
As a result, Haimu has been well received by customers around the world.
First-class service, first-class products, first-class management, first-class engineering is our permanent purpose.
Our advantages:
1. Your enquiry will be answered within 24 hours
2. One-stop purchasing experience
3. Customizable design
4. Our professional team will provide you with the most suitable farm solutions and the shortest delivery time.
5. Professional quality control system and after-sales service system
6. Service life of equipment: more than 10 years
FAQ:
Q1. What are the packing terms?
A: Standard export packing or according to your requirements.
Q2. What are your terms of payment?
A: 30% T/T as deposit, 70% before delivery. During the preparation period, we will report the progress of preparation to you every day, and send progress photos.
Q3. What are your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. What are your delivery times?
A: For regular products, it will take 10 to 15 days after receiving your advance payment. The exact delivery time depends on the goods and quantity you order.
Q5. Can you produce according to the sample?
A: Yes, we can produce according to your samples or technical drawings. Of course, the cost of making molds and fixtures is negotiated by both parties.
Q6. What is your sample policy?
A: We can provide regular samples, but the customer has to pay for the freight. The cost of expensive samples should be shared by both parties.
Q7. Do you test all goods before delivery?
A: Yes, we do 100% test before the goods leave the factory.
Q8: How do you maintain a long-term good relationship with our business?
A: 1. We will provide the most competitive price and quality to ensure our benefits to you;
2. No matter where you come from, we are all friends and family. We will do our best to help you.
How to use the pulley system
Using a pulley system is a great way to move things around your home, but how do you use a pulley system? Let’s look at the basic equations that describe a pulley system, the types of pulleys, and some safety considerations when using pulleys. Here are some examples. Don’t worry, you’ll find all the information you need in 1 place!
Basic equations of pulley systems
The pulley system consists of pulleys and chords. When the weight of the load is pulled through the rope, it slides through the groove and ends up on the other side. When the weight moves, the applied force must travel nx distance. The distance is in meters. If there are 4 pulleys, the distance the rope will travel will be 2×24. If there are n pulleys, the distance traveled by the weight will be 2n – 1.
The mechanical advantage of the pulley system increases with distance. The greater the distance over which the force is applied, the greater the leverage of the system. For example, if a set of pulleys is used to lift the load, 1 should be attached to the load and the other to the stand. The load itself does not move. Therefore, the distance between the blocks must be shortened, and the length of the line circulating between the pulleys must be shortened.
Another way to think about the acceleration of a pulley system is to think of ropes and ropes as massless and frictionless. Assuming the rope and pulley are massless, they should have the same magnitude and direction of motion. However, in this case the quality of the string is a variable that is not overdone. Therefore, the tension vector on the block is labeled with the same variable name as the pulley.
The calculation of the pulley system is relatively simple. Five mechanical advantages of the pulley system can be found. This is because the number of ropes supporting the load is equal to the force exerted on the ropes. When the ropes all move in the same direction, they have 2 mechanical advantages. Alternatively, you can use a combination of movable and fixed pulleys to reduce the force.
When calculating forces in a pulley system, you can use Newton’s laws of motion. Newton’s second law deals with acceleration and force. The fourth law tells us that tension and gravity are in equilibrium. This is useful if you need to lift heavy objects. The laws of motion help with calculations and can help you better understand pulley systems.
Types of pulleys
Different types of pulleys are commonly used for various purposes, including lifting. Some pulleys are flexible, which means they can move freely around a central axis and can change the direction of force. Some are fixed, such as hinges, and are usually used for heavier loads. Others are movable, such as coiled ropes. Whatever the purpose, pulleys are very useful in raising and lowering objects.
Pulleys are common in many different applications, from elevators and cargo lift systems to lights and curtains. They are also used in sewing machine motors and sliding doors. Garage and patio doors are often equipped with pulleys. Rock climbers use a pulley system to climb rocks safely. These pulley systems have different types of pinions that allow them to balance weight and force direction.
The most common type of pulley is the pulley pulley system. The pulley system utilizes mechanical advantages to lift weight. Archimedes is thought to have discovered the pulley around 250 BC. in ancient Sicily. Mesopotamians also used pulleys, they used ropes to lift water and windmills. Pulley systems can even be found at Stonehenge.
Another type of pulley is called a compound pulley. It consists of a set of parallel pulleys that increase the force required to move large objects. This type is most commonly used in rock climbing and sailing, while composite pulleys can also be found in theater curtains. If you’re wondering the difference between these 2 types of pulleys, here’s a quick overview:
Mechanical Advantages of Pulley Systems
Pulley systems offer significant mechanical advantages. The ability of the system to reduce the effort required to lift weights increases with the number of rope loops. This advantage is proportional to the number of loops in the system. If the rope had only 1 loop, then a single weight would require the same amount of force to pull. But by adding extra cycles, the force required will be reduced.
The pulley system has the advantage of changing the direction of the force. This makes it easier to move heavy objects. They come in both fixed and mobile. Pulleys are used in many engineering applications because they can be combined with other mechanisms. If you want to know what a pulley can do, read on! Here are some examples. Therefore, you will understand how they are used in engineering.
Single-acting pulleys do not change direction, but compound pulleys do. Their mechanical advantage is six. The compound pulley system consists of a movable pulley and a fixed pulley. The mechanical advantage of the pulley system increases as the number of movable wheels decreases. So if you have 2 wheels, you need twice as much force to lift the same weight because you need a movable pulley.
The mechanical advantage of a pulley system can be maximized by adding more pulleys or rope lengths. For example, if you have a single pulley system, the mechanical advantage is 1 of the smallest. By using 2 or 3 pulleys, up to 5 times the mechanical advantage can be achieved. You can also gain up to 10 times the mechanical advantage by using multiple pulley systems.
The use of a single movable pulley system also adds to the mechanical advantage of the pulley system. In this case, you don’t have to change the direction of the force to lift the weight. In contrast, a movable pulley system requires you to move the rope farther to generate the same force. Using a compound pulley system allows you to lift heavy loads with ease.
Safety Issues When Using Pulley Systems
Pulleys have an incredibly unique structure, consisting of a disc with a groove in the middle and a shaft running through it. A rope or cord is attached to 1 end of a pulley that turns when force is applied. The other end of the rope is attached to the load. This mechanical advantage means that it is much easier to pull an object using the pulley system than to lift the same object by hand.
Although pulley systems are a common part of many manufacturing processes, some employers do not train their workers to use them properly or install protection to prevent injury. It is important to wear proper PPE and follow standard laboratory safety practices during pulley system activities. Make sure any support structures are strong enough to handle the weight and weight of the rope or rope. If you do fall, be sure to contact your employer immediately.
