China Good quality 2ak Series Double Groove Sheaves Pulleys for 4L or a Belts pulley bearing

Product Description

Adjustable Pitch V-Belt Pulleys

Product Description

2AK double groove pulleys are manufactured for 2 banded A-series v-belts or 2 single A-series v-belts, as well as multiple 3L v-belts can also be used with these pulleys. 2AK double groove sheave pulleys are commonly known as double AK pulleys and range in diameter from 2.00″ to 18.25,” but custom ones are also available CHINAMFG request. Double AK series pulleys are typically used in medium to heavy-duty agricultural and industrial applications. Our double v-belt pulleys are manufactured using state-of-the-art techniques combined with premium high-performance and high-strength features like grade 35 cast iron instead of grade 25.

Product Parameters

2AK Series Pulley Size Chart

Installation and Removal of Pulleys

Install

1. Check the pulley groove to make sure there are no scratches or sharp edges and all dimensions are up to standard;

2. Clean the surfaces of all parts, such as hub holes, taper sleeves, bolt holes, etc. Fit the cone sleeve into the pulley, aligning all the screw holes.

3. Apply oil to the screw (TB 1008-TB 3030) and thread (TB 3525-TB 5050) and screw them into the mounting holes, but do not tighten them yet.

4. Clean the surface of the drive shaft, push the pulley with the tapered sleeve installed to the predetermined position on the shaft, and check whether the V-belt pulley is aligned.

5. When using the keyway, it must be inserted into the hub first, and there must be a certain tolerance between the keyway and the hole hub.

6. Using a hexagonal wrench conforming to the DIN911 standard, alternately, gradually, and evenly tighten the bolts in each mounting hole until the torque shown in the table below is reached.

7. After a short period of operation (0.5 to 1 hour), check the tightening torque of the bolts and retighten them if necessary.

8. To prevent the intrusion of foreign matter, fill the hole’s connection hole with grease.

Disassemble

1. Loosen all the bolts, take out 1 or 2 of the bolts according to the number of disassembly holes, lubricate the bolt pattern and the tip of the bolt with oil, and insert the bolt into the disassembly hole.

2. Tighten the bolts alternately until the taper sleeve and pulley are loosened.

3. Remove the taper sleeve and pulley from the shaft.

Technological Processing

Company Profile

HZPT is a professional manufacturer of mechanical parts. Our main products are belt pulleys, sprockets, taper sleeves, coupling, and other transmission parts. Its products are mainly exported to Germany, Britain, France, and other European countries, with an annual export value of 18 million US dollars, accounting for more than 65% of the total output. The annual output value reached 200 million yuan.

Our products all adopt international, European, and American advanced industrial standards, use precise and good processing equipment, develop reasonable production technology, apply efficient and flexible management systems, and improve the quality management system to ensure that the product quality is good and the price is affordable.

Our factory adheres to the enterprise concept of “quality: the basis of enterprise survival, integrity: the basis of enterprise development, service: the source of enterprise development, low price: the instrument of enterprise development.” We are always looking CHINAMFG to the presence of customers at home and abroad, seeking CHINAMFG benefits and joint cause development.

Warehouse Stock

The warehouse covers an area of 5000 square CHINAMFG and can provide all kinds of standard models A/B/C/Z, with complete quantity and large quantity in stock. Meanwhile, it accepts all sorts of non-standard customization for drawing production. The daily production capacity is 10 tons, and the delivery time is short.

Packaging & Shipping

Experienced Workers Packing Pulleys Carefully, safe wooden cases keep parts from being injured or damaged during sea or air shipment.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

View More