China Custom 2be Pump Circulating Water Vacuum Pump Air-Compressors near me factory

Product Description

2BEA series Siemens NASH water ring vacuum pump and compressors is a kind of high-efficiency and enger-saving product developed on the basis of years of production experience and scientific research, combined with international advanced technology, typically used for pumping gas without solid particles, insoluble in water, and non-corrosive, so as to form a vacuum or pressure in a sealed container.

By changing the materials, it can be used for pumping corrosive gases or corrosive liquids. It is widely used in papermaking, chemical, petrochemical, light industry, pharmaceuticals, food, coal, mineral processing, and other industries.

Features
1. Use imported bearings to ensure accurate location and stable operation of the impeller.
2. Impeller material use cast iron or welded steel, and fully guarantee the impeller stability in a variety of adverse conditions, and greatly increased the pump life.
3. Pump body uses steel, increase the service life of vacuum pump.
4. As the most easily damaged parts, the shaft sleeve uses high-chromium stainless steel, life expectancy has increased by 5 times.
5. Pulley (belt drive) is standard high-precision, reliable operation and long service life and convenient disassemble.

6. Coupling (direct Transmission) uses standard high-strength flexible coupling, flexible component uses polyurethane material, which is stable and reliable operation, long service life.
7. ‘Unique top-mounted gas-water separator to save space and reduce the noise.
8. All casting uses resin sand casting, which is good surface quality, pump cooling well.
9. Mechanical seal (optional) is imported, fully guaranteed no leakage in the long-running process.
10. Casing inner wall is similar to the type of oval, ensure the best exhaust results.

Performance Data
 

Model Limited Vacuum hpa Speed r/min Max. Capacity m³ /min Power KW Driven Type Voltage Suction mm Discharge mm
2BEA-103-0 33 1300 4.9 11 Pulley 380 V 65 65
1450 5.6 11 Couping
1625 6.2 15 Pulley
1750 6.7 15 Pulley
2BEA-153-0 33 1100 7.4 15 Pulley 380 V 100 100
1300 8.9 18.5 Pulley
1450 10 18.5 Couping
1625 10.8 22 Pulley
1750 11.5 30 Pulley
2BEA-202-0 33 790 9.5 18.5 Pulley 380 V 125 125
880 11 18.5 Pulley
980 12 22 Coupling
1100 14 30 Pulley
1170 15 30 Pulley
2BEA-203-0 33 790 14 30 Pulley 380 V 125 125
880 16 30 Pulley
980 18 37 Coupling
1100 20 45 Pulley
1170 21 45 Pulley
2BEA-252-0 33 565 20 30 Pulley 380 V 150 150
590 22 30 Coupling
660 25 37 Pulley
740 28 45 Coupling
820 30 55 Pulley
880 33 75 Pulley
2BEA-253-0 33 565 28 45 Pulley 380V 150 150
590 30 45 Coupling
660 35 55 Pulley
740 39 75 Coupling
820 43 90 Pulley
880 47 90 Pulley
2BEA-303-0 33 472 43 55 Pulley 380V 200 200
520 45 75 Pulley
530 48 75 Pulley
590 52 75 Coupling
660 58 90 Pulley
740 67 110 Coupling
2BEA-353-0 33 390 55 75 Pulley 380V 250 250
415 58 90 Pulley
464 65 110 Pulley
520 72 132 Pulley
590 81 160 Coupling
2BEA-403-0 33 330 78 132 Pulley 380V 300 300
372 85 160 Pulley
420 97 185 Pulley
472 110 200 Pulley
530 122 250 Pulley

 

Model Limited Pressure hpa Speed r/min Max. Capacity m³ /min Power KW Driven Type Voltage Suction mm Discharge mm
2BEA-355-1 160 372 61 90 Pulley 380V 250 250
420 71 110 Pulley 380 V
472 79 110 Pulley 380 V
500 83 132 Pulley 380 V
530 88 132 Pulley 380 V
590 95 160 Coupling 380 V
2BEA-405-1 160 330 93 132 Pulley or Reducer 380 V 300 300
372 106 160 380 V
420 119 185 380 V
472 130 220 380 V
530 141 280 380 V
2BEA-505-1 160 266 121 160 Pulley or Reducer 380 V 350 350
298 139 185 380 V
330 153 220 380 V
372 169 250 6KV
420 186 315 6KV
2BEA-605-1 160 220 168 220 Reducer 6KV 400 400
236 181 250 6KV
246 188 280 6KV
266 206 280 6KV
276 210 315 6KV
298 228 355 6KV
312 234 355 6KV
2BEA-705-1 160 197 259 355 Reducer 6KV Or 10KV 500 500
220 286 400
246 318 450
266 342 500
276 352 560

Detailed Photos

Packaging & Shipping

Packing Details  : One pump in One plywood case
Delivery Details : 30 days after order confirmation
 

Company Profile

ZheZheJiang oto Pump Industrial Co., Ltd. is a professional pump manufacturer integrating R&D, manufacturing, sales and service as a whole, which has been certified by ISO9001 international quality management system. 

Located in Xihu (West Lake) Dis.a Industrial Park, ZheJiang , Suoto Pump Industrial possesses 2 manufacturing bases in ZheJiang and ZHangZhoug. Since our inception, Suoto Pump Industrial has been committed to the innovation and development of various pumps. Our leading products include self-priming trash pump, centrifugal pump, submersible pump, diaphragm pump, vacuum pump, diesel pump, fire pump, etc.
 

FAQ

Q: Can I chat with you online? What is your company official website?
 

Q: What type of company SUOTO is? 
A: SUOTO is a manufacture and trading company, has factories in ZheJiang and ZHangZhoug, with export and import license.

Q: What kinds of pumps do you supply?
A: Our products including self-priming trash pump, centrifugal pump, diaphragm pump, submersible pump, chemical pump, oil pump, diesel pump, fire fighting pump, etc.

Q: What is your payment terms?
A: Alibaba Trade Assurance, Western Union, Paypal, T/T, L/C, etc.

Q: Can you provide OEM, ODM service?
A: Yes. We have factories in ZheJiang and ZHangZhoug, we can make products according to your requirements.

Q: Why should we buy from you?
A: We are committed to provide best quality products at minimum delivery time and competitive price. We believe this is what customer wants. We are satified until customers are.

Q: What is your warranty period?
A: We provide 1 year of unconditional warranty on our products for the manufacturing defects.

Q: What about delivery time?
A: Normally our production time is within 2 weeks. Please confirm before order.

 

Three basic types of pulleys, their applications and ideal mechanical advantages

There are 3 basic types of pulleys: movable, fixed and compound. Each has its advantages and disadvantages, and you should be able to judge which type is best for your needs by looking at the table below. Once you have mastered the different types of pulleys, you can choose the right pulley for your next project. Now that you have mastered the 3 basic types, it is time to understand their applications and ideal mechanical advantages.
pulley

describe

The stress characteristics of a pulley depend on its size and construction. These stresses are derived by comparing the stress characteristics of different pulley designs. Stress criteria include static and fatigue strength analyses and specify maximum stress ranges. Stresses are calculated in a 3D stress field, including radial, tangential and axial stresses. The stress characteristics of pulleys are critical to the design and manufacture of industrial machines.
The principal stresses on the pulley shell are distributed in the tangential and hoop directions, close to the centerline of the pulley. If the pulley has a wide face, the axial stress occurring near the shell/disk junction can be large. The stress distribution was determined using British Standard BS5400 Part 10: Stresses at the shell and end disc connections for infinite fatigue life.
Another type of composite is a pulley with a belt section. Such structures are well known in the art. The corresponding help chapters for these elements contain detailed descriptions of the internal structure of these components. Chamfers between pulleys can also be defined using multiple tapers, with a smaller taper extending from midpoint 44 to large diameter 42. Additionally, the pulley can have multiple taper angles, and as the pulley moves away, the taper angle is from the center.

type

A pulley system uses a rope to move the object and 1 side of the rope to lift the load. The load is attached to 1 end of the pulley, while the other end can move freely in space. The force applied to the free end of the rope pulls the load up or down. Because of this, the mechanical advantage of the movable pulley is 2 to one. The greater the force applied to the free end of the rope, the greater the amount of movement achieved.
There are 3 common types of pulleys. The cast-iron variety has a rim at the front and a hub at the back. The arms of the pulley can be straight or curved. When the arms contract and yield instead of breaking, they are in tension. The top of the pulley centers the belt in motion and is available in widths ranging from 9mm to 300mm.
The rope, hub and axle are mounted on the pulley. They are common and versatile mechanical devices that make it easier to move or lift objects. Some pulleys change the direction of the force. Others change the magnitude. All types of pulleys can be used for a variety of different applications. Here are some examples. If you’re not sure which type to choose, you can find more resources online.
pulley

application

The applications for pulleys are almost limitless. This simple machine turns complex tasks into simple ones. They consist of a rope or chain wrapped around a wheel or axle. Using ropes, 1 can lift heavy objects without the enormous physical exertion of traditional lifting equipment. Some pulleys are equipped with rollers, which greatly magnifies the lifting force.
When used properly, the pulley system can change the direction of the applied force. It provides a mechanical advantage and allows the operator to remain separate from heavy objects. They are also inexpensive, easy to assemble, and require little lubrication after installation. Also, once installed, the pulley system requires little maintenance. They can even be used effortlessly. Despite having many moving parts, pulley systems do not require lubrication, making them a cost-effective alternative to mechanical lifts.
Pulleys are used in many applications including adjustable clotheslines in different machines, kitchen drawers and motor pulleys. Commercial users of pulley systems include cranes. These machines use a pulley system to lift and place heavy objects. They are also used by high-rise building washing companies. They can easily move a building without compromising its structural integrity. As a result, many industries rely on technology to make elevators easier.

Ideal mechanical advantage

The ideal mechanical advantage of a pulley system is the result of rope tension. The load is pulled to the center of the pulley, but the force is evenly distributed over the cable. Two pulleys will provide the mechanical advantage of 2 pulleys. The total energy used will remain the same. If multiple pulleys are used, friction between pulleys and pulleys reduces the return of energy.
Lever-based machines are simple devices that can work. These include levers, wheels and axles, screws, wedges and ramps. Their ability to work depends on their efficiency and mechanical superiority. The ideal mechanical advantage assumes perfect efficiency, while the actual mechanical advantage takes friction into account. The distance traveled by the load and the force applied are also factors in determining the ideal mechanical advantage of the pulley.
A simple pulley system has an MA of two. The weight attached to 1 end of the rope is called FA. Force FE and load FL are connected to the other end of the rope. The distance that the lifter pulls the rope must be twice or half the force required to lift the weight. The same goes for side-by-side pulley systems.

Materials used in manufacturing

While aluminum and plastic are the most common materials for making pulleys, there are other materials to choose from for your timing pulleys. Despite their different physical properties, they all offer similar benefits. Aluminum is dense and corrosion-resistant, and plastic is lightweight and durable. Stainless steel is resistant to stains and rust, but is expensive to maintain. For this reason, aluminum is a popular choice for heavy duty pulleys.
Metal can also be used to make pulleys. Aluminum pulleys are lightweight and strong, while other materials are not as durable. CZPT produces aluminium pulleys, but can also produce other materials or special finishes. The list below is just representative of some common materials and finishes. Many different materials are used, so you should discuss the best options for your application with your engineer.
Metals such as steel and aluminum are commonly used to make pulleys. These materials are relatively light and have a low coefficient of friction. Steel pulleys are also more durable than aluminum pulleys. For heavier applications, steel and aluminum are preferred, but consider weight limitations when selecting materials. For example, metal pulleys can be used in electric motors to transmit belt motion.
pulley

cost

Replacing a tensioner in a car’s engine can cost anywhere from $90 to $300, depending on the make and model of the car. Cost can also be affected by the complexity of the pulley system and how many pulleys are required. Replacement costs may also increase depending on the severity of the damage. The cost of replacing pulleys also varies from car to car, as different manufacturers use different engines and drivetrains.
Induction motors have been an industrial workhorse for 130 years, but their cost is growing. As energy costs rise and the cost of ownership increases, these motors will only get more expensive. New technologies are now available to increase efficiency, reduce costs and improve safety standards.
The average job cost to replace an idler varies from $125 to $321, including labor. Parts and labor to replace a car pulley can range from $30 to $178. Labor and parts can cost an additional $10 to $40, depending on the make and model of the car. But the labor is worth the money because these pulleys are a critical part of a car’s engine.

China Custom 2be Pump Circulating Water Vacuum Pump Air-Compressors     near me factory China Custom 2be Pump Circulating Water Vacuum Pump Air-Compressors     near me factory

Recent Posts